1600-8M-440E-Slv - Timing Belt, 8Me, (440Mm X 1600Mm Pl), 200T

Brand: General Belts

Part #: 1600-8M-440E-Slv

Description / 1600-8M-440E-Slv - Timing Belt, 8Me, (440Mm X 1600Mm Pl), 200T

Timing Belt, 8Me, (440Mm X 1600Mm Pl), 200T

Commercial & Industrial Drive Belts • Timing Belt

1600-8M-440E-Slv

1600-8M-440E-Slv replacement belt, timing belt, 8me, (440mm x 1600mm pl), 200t, commercial laundry drive belt

Precision synchronous timing belt — 8M — 8 mm HTD pitch, heavy duty. Synchronous (toothed) belts transmit power with no slip, maintaining exact speed ratios between drive and driven components. Ideal for indexing, positioning, and high-precision motion control applications in commercial and industrial equipment.

⚡ Belt Features

▶ Zero-slip synchronous drive — maintains exact speed ratio at all loads
▶ High-modulus tensile cord (fiberglass or aramid) for minimal elongation under load
▶ Neoprene or polyurethane tooth body resists oil, ozone, and heat
▶ Precisely molded tooth profile for accurate mesh with matching sprockets

🔧 Installation Tips

✓ Disconnect and lock out power before accessing belt drive
✓ Inspect sheave/sprocket grooves for wear — replace worn sheaves before installing new belt
✓ Never use a pry bar to force the belt over sheave flanges — this damages tensile cords
✓ Set tension per equipment service manual — over-tension damages bearings, under-tension causes slip
✓ Re-check tension after first 4–8 hours of operation — belts seat slightly after initial run-in

📋 Specifications

Detail	Value
Part Number	1600-8M-440E-Slv
Belt Type	Timing / Synchronous Belt
Pitch	8M
Pitch Length	1600 mm
Width	440Mm mm
Teeth	200
Application	Power Transmission — Synchronous Drive Systems

❓ Common Questions

Q: What does the belt pitch number mean?

A: The pitch is the distance between tooth centers. A smaller pitch (e.g. 3M, 5M, XL) suits lighter loads and higher speeds. A larger pitch (e.g. 8M, 14M, H, XH) handles higher torque at moderate speeds. Always match the replacement belt pitch exactly to the sprocket tooth pitch.

Q: Can I use a wider belt than the original?

A: A wider belt of the same pitch will carry more torque — acceptable if the sprocket is wide enough to support it. However, always verify the sprocket width before installing a wider belt. A belt that overhangs the sprocket flanges will track incorrectly and wear prematurely.

Not sure this is the right belt for your equipment?

Our team can cross-reference by part number or equipment model before you order.

1600-8M-440E-Slv - Timing Belt, 8Me, (440Mm X 1600Mm Pl), 200T

Description / 1600-8M-440E-Slv - Timing Belt, 8Me, (440Mm X 1600Mm Pl), 200T

SUPPORT & SERVICES

DEPARTMENTS

INFORMATION